Synchronous reluctance motors, also known as "reactive synchronous motors", are AC motors. It adopts sinusoidal power supply, and its stator structure is the same as that of the traditional asynchronous motor stator. The rotor structure is special only silicon steel sheet, and does not contain permanent magnet or field winding. The rotor structure is divided into two types: axial lamination rotor and punch lamination rotor according to different processing techniques.
2019-11-11
About how UC284× works, it involves knowledge about analog and digital. So today, let the author lead you to understand it. I hope that you will gain something after reading it.
2019-10-29
With the continuous development of society and the rapid advancement of science and technology, more and more mechanical work situations need to be controlled synchronously. In order to improve production efficiency, modern production and processing processes are automated and continuous production. Therefore, the reliability, economy, speed ratio and synchronization performance of the drive motor are put forward higher requirements. At present, there are common synchronous control in textile, m
2019-10-28
The multi-axis stage lighting system independently developed by VEICHI has helped the Nankai University 100th Anniversary Gala with excellent performance.
2019-10-22
As a state-level high-tech enterprise and dual-soft enterprise engaged in the research, development, production and sales of industrial automation products, VEICHI is honored to be invited to participate in the AUTOMATION EXPO 2019.
2019-09-29
September 18-20, Beijing time, the 2019 Indian Renewable Energy Exhibition was held in New Delhi, India. The Renewable Energy Exhibition (REI) is a platform for the exchange of new energy technologies such as solar energy, wind energy and power conservation. Its purpose is to promote the development and research of green energy such as wind energy and solar energy in daily life, in order to accelerate the development and learning of renewable energy technologies in India. With the support of the
2019-09-20
There are some situations in the work: the damaged IGBT module should analyze the cause of the failure, or the module with good appearance should judge whether there is any abnormality. In the absence of specialized equipment, digital multimeters can be used as a common tool to help us quickly identify IGBTs. At this time, the diode file, the resistance file, and the capacitance file of the multimeter are generally used. It is worth noting that the test data of the multimeter is not universal an
2019-09-18
The IOT remote monitoring and management system of VEICHI is a self-developed, multi-layer architecture design, real-time, reliable, secure, scalable and other reasonable hierarchical design of the IOT monitoring system that can be remotely monitored, managed, maintained and analyzed. The interface is friendly, simple to operate, full-featured, compatible with all products of the company, and also meets the access of some specific devices. It can solve various problems in the various industries
2019-09-16
From the beginning of January 2019 to the present, I have been working in the company for nearly five months without knowing it. I have gained a lot during this time, which is of great significance to my transition from student to professional engineer. As a college student who has just stepped into the society, he came to the new environment of VEICHI, how to coexist with colleagues, how to do a good job, and how to make progress and breakthrough after learning to invest. All kinds of confusion
2019-08-14
The wire drawing machine is also called a pull drawing machine. Wire drawing machine is a widely used mechanical equipment used in industrial applications, it is used in machinery manufacturing, metal processing, petrochemical, and plastic, bamboo and wood products, wire and cable and other industries.
2019-08-06
On July 28, 2019, the Air Compressor Industry Heroes Taizhou was held in Zhejiang Taizhou Xiangyi Hotel. Suzhou VEICHI Electric Co., Ltd. and air compressor manufacturers and agents all over the country gathered a total of 200 guests to participate in this conference to share new technologies, new products, new information, new models, and discuss how to develop and develop the machine industry in the era of air compressors.
2019-07-30
Hello everyone, I am a software engineer at VEICHI, responsible for platform software development. The software code is the brain and core of the machine. The stability, security and reliability of the machine are inseparable from the planning, layout and writing of the software. Next, I will give you a brief introduction to some of the software development work. If there are any deficiencies, please advise.
2019-07-27
On July 25th, the 3rd National Factory Digital Upgrade Solution Roving Seminar hosted by gongkong® came to Changzhou Station. The scene was as hot as Changzhou.
2019-07-26
In the context of the international economy, how to improve the profit of the weaving industry?Let every textile entrepreneur think hard.
With the development of frequency converter speed control technology and people's continuous improvement of the quality requirements of drinking water, frequency conversion water supply equipment has been widely used in multi-story residential community living and high-rise building life water supply, frequency conversion speed water supply has the following advantages:
VEICHI China has stopped all its business transaction with the firm Veichi Electric in India which is operated by Darshan Dave, and now we already have taken the legal action for him.
2019-07-15
On July 11, 2019, Shanghai CRRC Hange Marine & Offshore Engineering Co., Ltd. signed a strategic cooperation agreement with VEICHI Electric Co., Ltd. in Shanghai. CRRC Hange Chairman Xiong Li and VEICHI General manager Zhiyong Hu attended the signing ceremony.
2019-07-15
With the development of the times, there are labels for various uses and shapes in life. Ordinary coated papers are processed into printed labels, coated, die-cut, etc., and are made into finished labels. However, it is impossible to ensure that all the links are free of problems during the production process, so the quality of the finished product label is also required to be tested.
2019-07-12
CNC lathe is a high-precision, high-efficiency automated machine tool. It has a wide range of processing properties, processing linear cylinders, slanted cylinders, circular arcs and various threads. It has various compensation functions such as linear interpolation and circular interpolation, and has played a good economic effect in mass production of complex parts. CNC lathe is the most widely used CNC machine tool in China with the largest coverage, accounting for about 25% of the total numbe
2019-07-12
I am often asked about my profession. Hesitant answer: Software engineer. The other party: Ah? Program? IT man. Hesitant answer: No, I am engaged in electrical, not IT. The other party: Oh, electrical appliances, refrigerator and washing machine? Both sides are in a silent silence...
2019-06-14
Do you want to eat sweet fruit in the desert?
Do you want to feel the waves in the desert?
Do you want to take a shower while eating watermelon in the desert?
After a year and a half, in early December 2018, I once again stepped on this land in Suzhou
2019-05-29
On the morning of May 20, CITIC Heavy Industries and VEICHI held a strategic cooperation signing ceremony at the headquarters of CITIC Heavy Industry Kaicheng Intelligent Equipment Co., Ltd. In the future, based on the principle of equality and mutual benefit, the two sides will work together to create a win-win, sustainable development strategic partnership.
2019-05-28
Hello everyone, this time the product story, ID engineer introduced to you is the development process of EHS100 electro-hydraulic servo machine.
Beijing May 15th, 2019, the solar photovoltaic exhibition in Munich, Germany, was held in Fairgrou, Munich New International Expo Center.
2019-05-17
