SI30 Solar Pump Inverter
  • SI30 Solar Pump Inverter

SI30 Solar Pump Inverter

Ingenious Design -- Small and exquisite inverter modules
Industry 4.0 -- GPRS, bluetooth and cloud platform to build the IOT module
Variety Modules -- AC/DC integrated (Boost) module
IP65 Protection ---- A perfect union of fashion sense and technology

With modular design and IP65 protection, VEICHI SI30 synchronous photovoltaic pump inverter is highly praised by customers. Compared with SI20, the SI30 series inverter enhances the overall performances both in hardware and software. SI30 Video: https://youtu.be/eS5JCRXyUcI

Solar pump IOT system

Solar pump IOT system

Real-time monitoring, remote expert consultation, large data automatic calculation of energy-saving status and support PC and mobile APP query.

IP65---360 degrees waterproof and dustproof

SI30 adopts specialized die-casting aluminum Ai-Si-Cu alloy as the shell material, with the high-end protection of IP65: waterproof panel, waterproof joint and waterproof enclosure.

AC/DC automatic switch

Basing on the customers’ requirements, the AC and DC power supply could be automatically switched by software.

Enhanced Protections

There are complete and enhanced protections in SI30, such as the dry run, dormancy, water fulfill, phase failure, OC, OV, OL, OH and so on.

AM and PMSM Motors

Same as SI20, the SI30 series solar pump inverter could perfectly work with AM and PMSM motors.

Bluetooth Keyboard

Bluetooth keyboard is firstly adopted in SI30 series by scanning the code to meet the on-site requirements. In addition, there is also external keyboard which is available for customers.

One Key Start and Stop

The human computer interface in the pre-cover support end users "one key start and stop".

Application cases of  solar pump system

Application cases of  solar pump system

Besides, Veichi Electric also provides other solar energy products such as PV inverter at wholesale price.

 

 

Project Parameters
Input Voltage,frequency D1 model:90-400VDC/single-phase 110VAC 50/60HZ
D3 model:150-450VDC/ single-phase 220VAC 50/60HZ
D5 model:300-850VDC/ three-phase 380VAC 50/60HZ
Allowed fluctuation range Voltage unbalance ratio:<3%
Frequency fluctuation:±5%
Distortion rate: conform to IEC 61800-2
Frequency inverter efficiency ≥97%
Recommended voltage Voc D1 model:175-380VDC
D3 model:360-430VDC
D5 model:620-750VDC
Output MPPT efficiency reaches 99.9%
Output frequency range 0-320Hz (320 Hz or higher frequency can be customized)
Overload capacity 150% rated current 1min; 180% rated current 10s; 200% rated current 0.5s
 
Functions Special protection functions Dry protection, low frequency protection, minimum power protection, sleep protection, overwater protection, pump overcurrent protection, etc.
AC/DC switching Identify light intensity, automatic AC and DC switching
IOT function Supports VEICHI clouds service, scan the code to connect mobile APP
Boost up-voltage function Only for D1, D3 models, supports built-in boost function
Model of drive pump Three-phase AC asynchronous pump, three-phase permanent-magnet synchronous pump, BLDC (5.5KW or less), DC brushless water pump, single-phase pump (2.2KW or less)
Multi-function input terminal Supports 4 X-terminal input
Analog input Supports double analog AI input, 0-10V/0-20mA double selection
Basic protection functions Over-voltage, under-voltage, inverter over-current, module fault, inverter overload, motor overload, current detection zero-drift fault, current detection fault, E2RCM fault, grounding short-circuit fault, input phase loss, output phase loss , inverter overheating, communication fault, motor parameter self-learning fault, etc.
Short-circuit detection of motor grounding Automatic detection whether the motor is Short-circuit to ground in power-on
Communication network Supports RS485 communication to realize network and linkage control between VEICHI inverters
Long-distance monitoring function Supports long-distance program upgrade, data monitoring and lock function, can connect VEICHI GPRS module, and supports VEICHI virtual oscilloscope for monitoring and debugging.
Surroundings Installation location Outdoor, less than 1000m altitude, keep away from corrosive air and direct sunlight
Temperature, humidity -10-60°C, 20%-95%RH (no condensation)
Vibration The vibration is less than 0.5g when the vibration frequency is less than 20Hz
Storage temperature -20~60℃
Installation mode Suspension installation
Protection class IP65
Cooling method Natural cooling/forced air cooling
International certification CE(in processing)